Here is a list of all the clutch replacement parts for the Toyota Supra Getrag 6 speed V160/V161 which can be useful for maintenance or conversions.
- If you currently have a 6 speed you won’t need all the parts, only the parts you broke or are replacing
- If you are upgrading your clutch to aftermarket it’s good to change the parts with an astrix * next to them
- If you are doing a conversion from auto to manual you will need them all depending on what came with the gearbox (IE: The release fork may have came with the transmission)
Toyota Supra Getrag 6 speed (V160, V161) Clutch parts;
Clutch:
Qty .. P/N …………. Name: …….. *Denotes non-reusable part
1 … 31250-14190 – Disk assy, Clutch
1 … 31210-14170 – Cover Assy, Clutch
1 … 90363-12002 – Pilot bearing (For input shaft)*
1 … 90903-63001 – Ball, Bearing (For release hub) *
1 … 96152-00500 – Ring, Snap (For clutch release hub, small) *
1 … 90560-79001 – Washer, Plate (For clutch release bearing)
6 … 90119-08026 – Std Bolt (For clutch pressure plate to flywheel)
1 … 90206-12006 – Washer, Wave (For clutch release bearing)
1 … 90520-75001 – Ring, Shaft snap (For clutch release bearing, large)*
1 … 31264-14060 – Spring, clutch thrust cone
1 … 31231-14050 – Hub, Clutch release bearing
1 … 90560-50001 – Washer, Plate (For clutch thrust cone spring)
Fork Assembly – All these parts may be on your transmission, if not you will need them, also the fork assembly has sub parts but it is easier to order 1 part number.
1 … 31234-14020 – Spring release fork support
2 … 90119-10054 – Std bolt (For spring release fork support)
1 … 31236-14030 – Support, release fork
1 … 31204-14060 – Fork Sub-assy, Clutch release
Sub parts for Fork Assembly
1 … 90249-12044 – Pin (For clutch release fork)
1 … 90206-80001 – Washer, wave (For clutch release fork)
1 … 96160-00900 – Ring, E (For clutch release fork)
Flywheel:
1 … 13450-0W011 – Flywheel sub-assy
1 … 90910-02115 – Bolt, Flywheel set *
Diagram;
3 thoughts on “Toyota Supra Getrag 6 speed – Full clutch replacement part numbers”
Thank you so much for th info provided here
It’s exactly what I needed to see.
Helped me tremendously.
Thanks
Hi,
Do you happen to have any photos of these parts? I am in the process of a manual conversion and some of the parts that I’ve received do not match the image given in the service manual. Most noticeably 90206-12006 – Washer, Wave (For clutch release bearing). No idea if I have the correct part or not:(
Hi,
I don’t have any pictures of these parts handy, that part in particular from memory is part of the release bearing assembly if I remember correctly. The picture in the diagram isn’t a very good representation of it, but the ordering is correct for assembly. If you do a google search of the part number you can see it’s just like a rubber o-ring/washer.